VCP550D Sample Question: 15

Question: 15

The following error displays during the final step of the configuration for a VMware High Availability (HA) cluster attached to five datastores:

The number of heartbeat datastores for host is 0, which is less than requireD. 2
What condition would cause this error?

A. One of the hosts in the cluster is not attached to the datastores planned for use with HA.
B. The hosts in the cluster do not have Storage DRS configured on one or more of their
datastores
C. One of the hosts in the cluster has an invalid Storage Policy configured on one or moreof their datastores.
D. The hosts in the cluster contain one or more datastores configured with a 1 MB blocksize.

Answer: A

Read More

VCP550D Sample Question: 14

Question: 14

A virtual machine fails to migrate during a Storage DRS event.
What could cause this issue?

A. Storage DRS is enabled for the datastore cluster but disabled for the virtual disks.
B. Storage DRS is enabled, but vMotion is disabled for the affected virtual machine.
C. The vMotion network used for Storage DRS is down for a host in the cluster.
D. Storage DRS is attempting to migrate the virtual machine between VMFS and NFS
datastores.

Answer: A

Read More

VCP550D Sample Question : 13

QUESTION NO: 13

Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two.)

A. LocalOS
B. OpenLDAP
C. NIS as an LDAP Server
D. VCMSDS

Answer: A,B

Read More

VCP550D Sample Question : 12

QUESTION 12:

A vSphere administrator needs to perform packet tracing from a Linux virtual machine. The virtual machine is attached to a vSphere Standard Switch configured with several VLANs.
Which approach could the administrator use to configure the network to capture all traffic from the Linux virtual machine?

A. Configure the virtual switch with VLAN Trunking and specify each VLANs on the port group
containing the virtual machine.
B. Configure a vSphere Distributed Switch with VLAN Trunking. Create a port group and configure
it with Promiscuous Mode. Connect the virtual machine to that port group.
C. Configure the port group containing the virtual machine for Promiscuous Mode. Set the port
group to use VLAN 1.
D. Configure a vSphere Distributed Switch with VLAN Trunking. Connect the virtual machine to the switch and enable Port Mirroring on the port group containing the virtual machine.

Answer: B

Read More

VCP550D Sample Question : 11

QUESTION 11:

A vSphere Standard Switch is configured with two uplinks.When adjusting the failover order of the uplinks, what are two valid states in which anadministrator can place the uplinks? (Choose two.)

A. Active
B. Unused
C. Passive
D. Disabled

Answer: A,B

Read More

VCP550D Sample Question : 10

QUESTION 10:

An administrator must determine which Update Manager procedures can be performed using the
vSphere Web Client, and which must be completed using the Windows vSphere client.

Which two tasks require the use of the Windows vSphere client? (Choose two.)

A. Attach and detach baselines to inventory objects
B. Scan inventory objects for compliance
C. Create a baseline for an inventory object
D. Stage a baseline for remediation

Answer: C,D

Read More

VCP550D Sample Question : 9

QUESTION 9:

An administrator of a secure environment needs to add an iSCSI target to a new ESXi host using
the vSphere client. The administrator has configured discovery and performed a rescan operation,but the iSCSI target does NOT appear.

Which action should the administrator take for the target to appear in the vSphere client?

A. Configure appropriate CHAP authentication settings
B. Bind a VMkernel port to the iSCSI initiator
C. Configure Jumbo Frames prior to adding iSCSI targets
D. Enable iSCSI in a vSphere Distributed Switch configuration

Answer: A 

Click Here For Complete & Confirmed Exam Questions File 

Pass4sure VCP-550d Q&A

Read More

VCP550D Sample Question : 8

QUESTION 8:

A vSphere administrator deleted a vApp from disk. A second administrator needs the virtual
machines that were contained in the vApp.

What should the first administrator do to make the virtual machines available?

A. Recover the virtual machines from backup
B. Add the virtual machines back into inventory
C. Undelete the vApp
D. Recover the virtual machines from Stranded Items

Answer: A

Read More

VCP550D Sample Question : 7

QUESTION 7:

An administrator needs to prevent two virtual machines from running on the same host at any
time.

Which DRS rule should the administrator apply?

A. vm-to-vm affinity
B. vm-to-host affinity
C. vm-to-vm anti-affinity
D. vm-to-host anti-affinity

Answer: C

Read More

VCP550D Sample Question : 6

QUESTION 6:

Which statement is true about the hardware configuration for ESXi hosts participating in a virtual SAN?

A. The hosts must have identical hardware.
B. Each host must have at least one Solid State Drive (SSD).
C. The hosts must have network attached storage.
D. Each host must have a RAID Controller.

Answer: B

Read More

VCP550D Sample Question : 5

QUESTION 5:

An administrator must determine which Update Manager procedures can be performed using the
vSphere Web Client, and which must be completed using the Windows vSphere client.
Which two tasks require the use of the Windows vSphere client? (Choose two.)

A. Attach and detach baselines to inventory objects
B. Scan inventory objects for compliance
C. Create a baseline for an inventory object
D. Stage a baseline for remediation

Answer: C,D

Read More

VCP550D Sample Question : 4

QUESTION 4:

An administrator of a secure environment needs to add an iSCSI target to a new ESXi host using the vSphere client. The administrator has configured discovery and performed a rescan operation,but the iSCSI target does NOT appear. Which action should the administrator take for the target to appear in the vSphere client?

A. Configure appropriate CHAP authentication settings
B. Bind a VMkernel port to the iSCSI initiator
C. Configure Jumbo Frames prior to adding iSCSI targets
D. Enable iSCSI in a vSphere Distributed Switch configuration

Answer: A

Read More

VCP550D Sample Question : 3

QUESTION 3:

A vSphere administrator deleted a vApp from disk. A second administrator needs the virtual machines that were contained in the vApp. What should the first administrator do to make the virtual machines available?

A. Recover the virtual machines from backup
B. Add the virtual machines back into inventory
C. Undelete the vApp
D. Recover the virtual machines from Stranded Items

Answer: A

Read More

VCP550D Sample Question : 2

QUESTION 2:

A vSphere administrator is configuring a fully automated DRS cluster and determines that DRS is not balancing virtual machine workloads.

What condition could cause this behavior?

A. vMotion is not properly configured on the hosts in the cluster.
B. HA is not properly configured on the hosts in the cluster.
C. The DRS threshold is configured on the most aggressive setting.
D. Some of the virtual machines have been disabled from DRS.

Answer: A

Read More

VCP550D Sample Question : 1

QUESTION 1:

A vSphere administrator needs to perform packet tracing from a Linux virtual machine. The virtual
machine is attached to a vSphere Standard Switch configured with several VLANs.
Which approach could the administrator use to configure the network to capture all traffic from the
Linux virtual machine?

A. Configure the virtual switch with VLAN Trunking and specify each VLANs on the port group
containing the virtual machine.
B. Configure a vSphere Distributed Switch with VLAN Trunking. Create a port group and configure
it with Promiscuous Mode. Connect the virtual machine to that port group.
C. Configure the port group containing the virtual machine for Promiscuous Mode. Set the port
group to use VLAN 1.
D. Configure a vSphere Distributed Switch with VLAN Trunking. Connect the virtual machine to the
switch and enable Port Mirroring on the port group containing the virtual machine.

Answer: B

Read More