VCP550D Sample Question : 12

QUESTION 12:

A vSphere administrator needs to perform packet tracing from a Linux virtual machine. The virtual machine is attached to a vSphere Standard Switch configured with several VLANs.
Which approach could the administrator use to configure the network to capture all traffic from the Linux virtual machine?

A. Configure the virtual switch with VLAN Trunking and specify each VLANs on the port group
containing the virtual machine.
B. Configure a vSphere Distributed Switch with VLAN Trunking. Create a port group and configure
it with Promiscuous Mode. Connect the virtual machine to that port group.
C. Configure the port group containing the virtual machine for Promiscuous Mode. Set the port
group to use VLAN 1.
D. Configure a vSphere Distributed Switch with VLAN Trunking. Connect the virtual machine to the switch and enable Port Mirroring on the port group containing the virtual machine.

Answer: B

Read More

How Do the VMware ROBO Editions Differ?

The new offering for remote/branch offices, VMware ROBO, comes with different features and VM licensing models.

VMware vSphere Remote Office Branch Office (ROBO) is available in standard and advanced editions. Both editions of VMware vSphere Hypervisor ROBO provide and share a common core of functionality. These include high availability (HA), vSphere vMotion, Storage vMotion, vSphere add warm data protection, replication, fault tolerance (FT) and vShield Endpoint security.

The advanced edition is based on the standard set of functions to include vSphere Distributed Switch, Host Profiles and auto-deployment. The Advanced Edition can be more attractive for larger, distributed enterprise environments that need the additional automation to deploy and manage remote systems.

Perhaps more interesting than the feature set is the approach to licensing. Previous VMware vSphere Essentials Kit for retail products and branches was based on licensing and applies to a maximum of three for the ESXi host based on the outlet site. New editions of VMware ROBO and has licenses for 25 virtual machines per site and remove the cap on ESXi. Note that some features are eliminated.

VSphere editions THEFT end the licenses previously included with the legacy vCenter Server Essentials kit, but users can use current versions of vCenter Server Standard for ROBO manage virtual machines or vCenter Server purchase separately. THEFT vSphere Standard Edition sells for $ 3,000 to Advanced Edition sells for $ 4.500; volume discounts are available through retailers favorites. The service and support contracts are available for ROBO deployments as well.

It is also worth noting that while a website can use a maximum of 25 licenses per package VM, VM unnecessary or excessive licenses can be distributed in more than one site. For example, VM 10 licenses could be used in a place six VM licenses could be used in a second site and nine licenses VM could be used in a third site.

Remember, you can not mix issues include theft or other licenses vSphere product in the same place. This means that you can not run vSphere vSphere Standard Standard ROBO in the same place.

Read More

VCP550D Sample Question : 11

QUESTION 11:

A vSphere Standard Switch is configured with two uplinks.When adjusting the failover order of the uplinks, what are two valid states in which anadministrator can place the uplinks? (Choose two.)

A. Active
B. Unused
C. Passive
D. Disabled

Answer: A,B

Read More

VMware Doubles Size of EVO:RAIL Clusters

VMware has doubled the number of virtual devices that can be configured using VMware EVO: RAIL software, ranging from four to eight of a total of 32 nodes in a single cluster.Mornay van der Walt, Vice EVO: RAIL Group VMware says that eventually EVO: lane change radically the focus of data center server to cases of hyper converged virtual devices.

"Instead of thinking in the server context, we are trying to make people embrace devices," said van der Walt. "The goal is to be able to climb using a series of reliable and repeatable processes."
In the third quarter of this year, van der Walt, said VMware expand the size of an EVO: RAIL Group making use of the newly introduced VMware vSphere 6 VMware virtualization and VSAN 6 platforms in order to provide even higher levels of scale .

Basically, he says, EVO: RAIL change the delivery model and consumption around the IT infrastructure in the data center. These devices are not only easier to scale, but also provide a noninvasive method for the introduction of patches and updates in the environment. As a result, the overall cost of maintaining data center environments is greatly reduced.

EVO: RAIL appliances are actually building blocks that IT organizations will have to rely to make the transition to the distribution of data center software defined depending him.Of course, as with any technology transition, There is a learning curve involved in the transition to EVO: RAIL. The worst that IT organizations can do, says van der Walt, you are treated as a server.

IT organizations must ensure that the network is configured properly before installation. But once you get past the initial deployment, each device can be configured to be automatically included in an existing cluster or be deployed as a basic element of a new EVO: RAIL lot.VMware is not the only supplier that paints a picture of a bright future SDDC. But in terms of IT skills management VMware it is clearly among those later. The challenge IT organizations to identify not only the speed at which you want to make the transition to a SDDC world but also how much they rely on a single vendor to get there.

Read More

VCP550D Sample Question : 10

QUESTION 10:

An administrator must determine which Update Manager procedures can be performed using the
vSphere Web Client, and which must be completed using the Windows vSphere client.

Which two tasks require the use of the Windows vSphere client? (Choose two.)

A. Attach and detach baselines to inventory objects
B. Scan inventory objects for compliance
C. Create a baseline for an inventory object
D. Stage a baseline for remediation

Answer: C,D

Read More

Cisco, Chambers looking for one last shot at VMware?

Reports emerged last week that Cisco may be close to buying the implementation hyperconvergence Nutanix.Cisco CEO John Chambers is seeking to go out with a bang - one last big acquisition to paste converted rivals EMC and VMware partners.

Nutanix makes computer / storage, networking, virtualization and management products integrated to the data center running on x86 hardware. The private company, worth more than $ 2 billion, is recognized as the leader in the market for infrastructure hyperconverged, which was recently introduced by VMware with its EVO: RAIL product.

Other players SimpliVity hyperconvergence, which has a relationship with Cisco, maxta, Scale Computing ScaleIO, which was acquired by EMC and LeftHand Networks, which was acquired by HP. Product VRTX Dell is also considered a hyperconvergence solution.

Cisco plays on the converged infrastructure market through partnerships with EMC, VMware and NetApp. Converged Infrastructure is not as closely related as hyperconverged but includes pre-integrated server, storage, networking and virtualization systems.Other converged infrastructure players including Dell, Hitachi Data Systems, HP, IBM and agile storage.

Cisco, EMC and VMware are involved in a joint venture called VCE converged infrastructure, but the acquisition of Nicira network virtualization startup VMware started to unravel the relationship Cisco / VMware / EMC. Cisco is defeated least 10% of their investment in VCE, now an EMC company. After that, VCE has begun to offer products that incorporate networks based NSX Nicira VMware as an option for the application Centric Cisco infrastructure.

So Cisco and Chambers, was shot through the acquisition of new Nutanix says Rinderer. And partnerships with EMC storage Cisco, already tense, and NetApp continue damaged.Cisco said it does not comment on rumors or speculation. "" The deal could be announced at a conference of partners and customers Nutanix in early June

Read More

VCP550D Sample Question : 9

QUESTION 9:

An administrator of a secure environment needs to add an iSCSI target to a new ESXi host using
the vSphere client. The administrator has configured discovery and performed a rescan operation,but the iSCSI target does NOT appear.

Which action should the administrator take for the target to appear in the vSphere client?

A. Configure appropriate CHAP authentication settings
B. Bind a VMkernel port to the iSCSI initiator
C. Configure Jumbo Frames prior to adding iSCSI targets
D. Enable iSCSI in a vSphere Distributed Switch configuration

Answer: A 

Click Here For Complete & Confirmed Exam Questions File 

Pass4sure VCP-550d Q&A

Read More